Previous
yuwell oxygen concentrator

Yuwell YU300 Home-care Oxygen Concentrator

13,000.00
Next

BMC P2 Nasal Mask Pillow Interface

2,500.00
BMC P2 Nasal Mask Pillow Interface

CONTEC – OC5B Oxygen Concentrator ( 7L )

28,000.00

Introduction

The OC5B Oxygen Concentrator was made up of an air compressor, a molecular sieve adsorption tower, a sensor, and a flow metre. The machine uses PSA (pressure swing absorbers) to make the molecular sieve absorbent.

Out of stock

Description

CONTEC -OC5B Oxygen Concentrator (7L)

The CONTEC – OC5B Oxygen Concentrator was made up of an air compressor, a molecular sieve adsorption tower, a sensor, and a flow metre. The machine uses the PSA (pressure swing absorbers) method to directly concentrate medicinal oxygen with high concentration from the air, with the molecular sieve being absorbent.

It’s compact and easy to transport. The machine has the advantages of being small in volume, light in weight, easy to move (due to the turning truckle), stable in performance, high in safety, easy to operate, low in noise, and safe in operation, all of which meet medical device criteria. Connecting peripherals to the machine allows it to measure and show SpO2 and pulse rate.

The equipment can be used in a variety of settings, including the home, clinic, hospital, oxygen bar, plateau outpost, gym centre, and so on.

Oxygen concentrator Functions:

  • With a functional indicator light
  • Filters are built-in to cleanse the gas.
  • Indicator of oxygen concentration
  • Time-accumulation function
  • Shutdown timing function
  • In case of a power outage, sound the alarm.
  • High/low pressure protection alarm
  • Low flow rate triggers an alarm.
  • High-temperature warning
  • SpO2 and pulse rate should be measured.

Performance:

Maximum flow-rate recommended: 7 L/min

Oxygen Output Concentration Levels:

(reach the stated oxygen concentration level within 30 minutes after turning on the machine): 93%±3% at the flowrate of 0.5~3L/min, Flowrate range: 0.5~5 L/min

Flowrate change at maximum recommended flowrate with 7 kPa back pressure: <0.5 L/min, Outlet pressure: 20kPa~50kPa

Input Power Consumption: 400 VA

Electrical Requirements: AC 220 V±10%, 50 Hz±1Hz

Operating noise: ≤55 dB(A)

SpO2 Measurement:   

Range: 0%~100%

Accuracy: ±2% when SpO2 is in range of 70%~100%; unspecified when less than 70%

Pulse rate Measurement:

Range: 30bpm~250bpm

Accuracy: ±2bpm or ±2%, whichever is greater

Accessories:

  • Humidifier bottle
  • User manual
  • Power cord
  • Nasal cannula
  • SpO2 probe

Physical characteristic:

  • Dimension: 508mm(L) × 260mm(W) × 530mm(H)
  • Weight: 21 Kgs
  • Temperature: 10℃~40℃
  • Relative humidity: ≤80%
  • Atmospheric Pressure: 860hPa~1060hPa

Additional information

Weight29 kg
Dimensions60 × 37 × 69 cm

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping